MISO RO Commercial Heavy-Cut Compound
Water-based commercial heavy-cut compound that removes P800-P1200 sanding marks. Silicone-free formula doesn't affect paint adhesion, so it's suitable for pre-paint prep.
Add to cart → fill in your details → send your order on WhatsApp; we confirm on WhatsApp whether each item can ship to your country and what shipping costs, then you pay
Product description
Sanding marks, orange peel, and oxidized paint need a heavy cut. The biggest worry is compound residue affecting paint adhesion afterward. MISO RO Commercial Heavy-Cut Compound is a water-based compound built to quickly fix medium to deep paint defects, removing P800-P1200 sanding marks fast. The silicone-free formula doesn't affect paint adhesion, so it's suitable for pre-paint prep, with little residue, no oil film, and no dusting issues. Works with a rotary polisher (RO).
Specs
- Capacity
- Ships in 1L, 4L, or 12L (WhatsApp us to confirm which size this page's price is for)
- Compatible machines
- Rotary polisher (RO, also sold as a "straight-shaft" polisher in tool shops); recommended speed 1000-1800 rpm
- Pads to pair with
- Wool pad or medium-hard orange foam pad; wipe off residue with a microfiber towel, and you can follow up with a fine polish for more gloss. This is a starting point, not the only way to do it. Adjust the pad and grit to the result you're getting as you go, and let how the finish looks decide what you pair next.
How to use it
- Apply 3-4 soybean-sized dots of compound to the center of the pad.
- Use with a wool pad or medium-hard orange foam pad.
- Recommended machine speed: 1000-1800 rpm on a rotary polisher (RO).
- Work in circles with medium pressure, about 15-30 seconds per section.
- Wipe off residue with a microfiber towel. You can follow up with a fine polish for more gloss.
Things to know
- Before working a large area, test on a small hidden spot first to check how the paint reacts.
- This is a heavy-cut compound. Don't stay in one spot too long, and keep an eye on the paint temperature.
- A rotary heavy cut will always leave holograms (also called buffer trails or swirl marks); that's a normal result of heavy cutting, not a product problem. Always follow up with a fine-grit compound to finish. Skip that step and hand the car back, and it'll show up badly in direct sunlight.
- Wear gloves and work in a ventilated area. Avoid eye contact; if it gets in your eyes, flush with plenty of water.
- Do not mix with other chemicals.
- pH, shelf life, and suitable/unsuitable surfaces haven't been published yet. For special surfaces like color-change wrap, PPF, or anything that isn't paint, WhatsApp us to confirm before use.
- Keep out of reach of children and pets.
FAQ
Yes, but it's designed for shops using it at high frequency. Home users chasing efficiency can use it too; it works just as well, but you won't need anywhere near as much as a shop does, so it may not be as cost-effective as a home-use version.
This product covers the P800 to P1200 cutting range. The formula is designed to be most stable and efficient in that range. After a heavy cut with No.3 (80 grit), you can go straight into the medium-cut stage with this product.
No.3 is an 80-grit heavy cut built for maximum cutting power. This one covers P800-P1200 and is built for speed, optimized for commercial work. They serve different jobs, and shops usually keep both on hand.
Application guide
Similar products
MISO RO Commercial Heavy-Cut Compound
If you're ready to buy, add it to your cart and send your order on WhatsApp. If you're not sure it's right for your car, ask us on WhatsApp first before you order.